Table of Contents
Advertisement
Customising preferences
Displaying the screen for
navigation settings
1
Press the HOME button to display the
"Top Menu" screen.
2
Touch [Settings].
The "Settings Menu" screen appears.
p This can also be operated using the "Short-
cut Menu" screen.
3
Touch [Navi Settings].
The "Navi Settings" menu appears.
4
Touch the item that you want to
change the setting.
# If you touch
, the previous screen re-
turns.
Checking the connections
of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
Display the "Navi Settings" screen.
1
= For details, refer to Displaying the screen for
navigation settings on this page.
2
Touch [Connection Status].
The "Connection Status" screen appears.
1
2
3
4
5
6
1 Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. "0" is shown while
the vehicle is stationary.
2 GPS Antenna
Indicates the connection status of the GPS
aerial, the reception sensitivity, and from
how many satellites the signal is received.
Signal com-
Colour
munication
Orange
Yes
Yellow
Yes
p When the GPS aerial is connected to
this navigation system, "OK" is dis-
played.
When the GPS aerial is not connected to
this navigation system, "NOK" is dis-
played.
p If reception is poor, please change the
installation position of the GPS aerial.
3 Handbrake
When the handbrake is applied, "On" is dis-
played. When the handbrake is released,
"Off" is displayed.
4 Illumination
When the headlights or small lamps of a ve-
hicle are on, "On" is displayed. When the
small lamps of a vehicle are off, "Off" is dis-
played. (If the orange/white lead is not con-
nected, "Off" appears.)
5 Back Signal
When the gear stick is shifted to "R", the sig-
nal switches to "High" or "Low". (One of
these is displayed depending on the vehicle.)
Chapter
27
Used in posi-
tioning
Yes
No
131
Engb
Advertisement
Table of Contents
