To select a menu, press [M] button.
To return the main menu, press and hold [M] button for 2~3sec.
To move to the right, press [
Step 3 Connectivity menu: To connect to the other transmitter.
Step 3-1-1 PIN method for connectivity [default]
If user want to find a transmitter to connect or change the other transmitter, press [▼] button to
select and press [M] button to connect the transmitter. Then, the message is shown as below and
the connection is completed.
Note: When the connection is completed, it exits from GUI menu automatically.
Step 3-1-2 PBC method for connectivity
If user want to use PBC method for connectivity, user can setup in General setting menu>WPS
method. (Refer to Step 4.3)
In case of connection or change into new transmitter, press [▼] button to select and press [M]
button to connect. After that, user can find the message shown as below. Press the PBC button in
the transmitter and [M] button in the receiver within 60sec.
To exit from GUI menu, press and hold [M] button for 2~3sec.
To return to the previous page, press and hold [
To cancel the current connection, press [
▶
] button.
▶
] button for 2~3sec.
] button.
▶
- 8 -