Playing Back With The Built-In Speaker/Headphones - Canon MV600i Instruction Manual

Playing Back with the Built-in Speaker/Headphones

Selector dial
When using the built-in speaker, make sure that "H" is not displayed on the
screen. When using the headphones, make sure that "H" is displayed. Change
the setting as necessary following the procedure below.
Switching the AV/Headphones Terminal
CAMERA
VCR SET UP
( 43)
1. Press the MENU button to open the menu.
2. Turn the selector dial to select [VCR SET UP] and
press the selector dial.
3. Turn the selector dial to select [AV/PHONES] and
press the selector dial.
4. Turn the selector dial to select [AV] or [PHONES H].
5. Press the MENU button to close the menu.
❍ The built-in speaker does not sound when "H" is displayed.
❍ Do not connect headphones unless "H" is displayed as it produces noise.
❍ The built-in speaker is monaural. Use headphones for stereo sound.
❍ The built-in speaker turns off when the camcorder is set to a mode other than
the PLAY (VCR) mode or when you use the headphones.
H (phones) terminal
MENU button
PLAY (VCR)
AV/PHONES•••AV
Built-in speaker
AV
CARD CAMERA CARD PLAY (VCR)
MENU
MENU
E
37