Displaying The Data Code - Canon MV600i Instruction Manual

Displaying the Data Code

Once date and time are set, the camcorder maintains a data code containing
E
recording date and time and other camera data such as shutter speed and exposure
(f-stop). (MV650i/MV630i: Only date and time appear when playing back a memory
card).
MENU button
Selector dial
❍ The data code display turns off when you turn the camcorder off.
❍ The data code may not be displayed if a recording made with this camcorder is
played back on a different digital camcorder.
❍ The data code cannot be displayed in frame advance/reverse playback. Camera
data may not appear in some special playback modes.
❍ When the TV screen displays are hidden (
the LCD screen. If you turn on the data code, displays other than the data
code will disappear from the LCD screen.
Available Data Code Combinations (in PLAY (VCR) mode):
DATA CODE
(tape only)
D/TIME SEL.
Date
Time
Date & Time
82
DATA CODE button
Controller buttons
Date/Time
1.JAN.2003
12:00:00 PM
12:00 PM
1.JAN.2003
133), the displays still appear on
Camera data
F1.8
1/250
F1.8
1/250
F1.8
1/250
MENU button
DATA CODE
button
Date/Time &
Camera data
F1.8
1/250
1.JAN.2003
F1.8
1/250
12:00:00 PM
F1.8
1/250
12:00 PM
1.JAN.2003