Ignition Switch Assembly - LG LCG3011BD Service Manual

Ignition Switch Assembly

WARNING
• DISCONNECT power supply before servicing.
• SHUT OFF gas supply to the cooktop before
sevicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
CAUTION
• Be careful when you work on the Cooktop
handling the sheet metal part.
• The 2 lock tabs on each ignitor switch are
fragile. Tab breakage can occur if excessive
release pressure is applied.
1. Remove the cooktop plate.(See "Cooktop Plate".)
2. Remove the LED lamp module.(See "LED Lamp Module".)
3. Carefully pry on the 2 release tabs and slide the switch off the valve stem.
4. Disconnect the connecters of the ignition switch assembly.
5. Remove the ignition switch assembly.
When replacing this part with new one, progress reversely.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
COMPONENT REPLACEMENT
Connectors to Spark Module(I.G. Trans)
Connector to Power Cord
-31- LGE Internal Use Only