Burner Caps And Heads - LG LCG3011BD Service Manual

CARE AND CLEANING OF THE COOKTOP

BURNER CAPS AND HEADS

BURNER CAPS
Lift burner caps off when they are cool.
Wash burner caps in hot, soapy water and rinse
with clean water. You may scour with a plastic
scouring pad to remove burned-on food particles.
BURNER HEADS
The burner heads are removable. Simply lift them off the
cooktop for cleaning.
The slits in the burner heads must be kept clean at all times
for an even flame. Clogged or dirty burner ports or
electrodes may cause improper operation of the cooktop.
Any spill on or around an electrode must be carefully
cleaned. Take care to not hit an electrode with anything hard or it could be damaged.
You should clean the burner caps and heads routinely, especially after bad spillovers which
could clog the openings. Lift burner heads off when they are cool.
To get rid of burned-on food, soak the burner heads in a solution of mild liquid detergent and
hot water for 20-30 minutes. For more stubborn stains, use a toothbrush.
NOTES:
• Do not use steel wool or scouring powders to clean the burners.
• Burners will not light if the cap is removed.
AFTER CLEANING
Before placing the burner caps and burner heads
back, shake out excess water and then dry them
thoroughly.
REPLACEMENT
Replace burner heads and caps over the electrodes
on the cooktop, in the correct locations according
to their size. There are one small, two medium, one
large and one extra large burner head and cap.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Burner cap is
properly seated.
Medium burner
head and cap
-21-
Burner cap is NOT
properly seated.
Cooktop
Extra large burner(Center)
head and cap
(on some models)
Small burner
head and cap
Lrage burner
head and cap
LGE Internal Use Only