Braun Oral-B iO Manual page 9

should stop after a few days. Should it persist after
2 weeks, please consult your dentist or dental
hygienist. If you have sensitive teeth and/or gums,
Oral-B recommends using the «Sensitive» or
«Super Sensitive» modes (optional in combination
with an Oral-B «Gentle Care» brush head (d)).
Timer
The timer signals with a short stuttering sound at
30-seconds intervals to move to the next quadrant
of your mouth. A long stuttering sound indicates
the end of the professionally recommended
2-minute brushing time.
The timer memorizes the elapsed brushing time,
even when the handle is briefly switched off during
brushing. The timer resets if pausing longer
than 30 seconds or placing the handle on the
plugged-in charger.
Note: During the use of the Oral-B App, the timer
may be deactivated for some features.
Note: You may also customize the timer settings
via Oral-B App.
Smart Pressure Sensor features (a)
Your toothbrush is equipped with a Smart Pressure
Sensor (3) that has various functionalities indicated
via different colours of light:
White (default) = Operating indicator (choose
individual colour via Oral-B App (b)) / Low pressure
indicator
Red = high pressure indicator / low battery
indicator
Green = recommended pressure indicator
Blue = Bluetooth pairing indicator
Orange = Error indicator (follow display messages)
Brush with the right pressure indicated with a green
light. If too much pressure is applied, it lights up in
red reminding you to reduce pressure. If the Smart
Pressure Sensor illuminates in white (or your pre-
selected colour), we recommend applying more
pressure.
During high pressure the brush head movement
will be reduced (in «Daily Clean», «Intense» and
«Sensitive» modes). Periodically check the
operation of the Smart Pressure Sensor by
pressing moderately on the brush head during use.
Note: During the use of the Oral-B App, the Smart
Pressure Sensor feedback may be inactive for
some features.
8
Note: Smart Pressure Sensor is deactivated during
«Tongue Clean» mode.
Brushing modes (depending on model)
Your toothbrush offers different brushing modes
indicated on the display:
«Daily Clean» – Standard mode for daily cleaning
«Sensitive» – Gentle, yet thorough cleaning for
sensitive areas
«Gum Care» – Gentle massage of gums
«Whiten» – Polishing for occasional or everyday
use
«Intense» – For an extraordinary clean feeling
(operated with a higher speed)
«Super Sensitive» – Super gentle cleaning for
extra sensitive areas
«Tongue Clean» – Tongue cleaning for occasional
or everyday use
When operating the «Tongue Clean» mode, we
recommend using a «Gentle Care» brush head (d).
You can brush your tongue either with or without
toothpaste. Brush the whole area of your tongue
systematically in gentle movements. The
recommended brushing time is 30 seconds; the
motor stops after 30 seconds.
Mode setting:
You may first choose your default mode by
pressing the mode button (8) successively once
the handle is awake (display turned on). Select
a mode by pressing the on/off button (7). Your
toothbrush starts in the selected default mode.
You may also change modes during brushing.
Note: You may also customize mode settings via
Oral-B App.
Interactive Display
Turn on the interactive display (4) by pressing the
on/off button (7). If not further instructed on the
display, you may toggle with the mode button and
select with the on/off button.
(10-16) «Mode selection» – toggle by pressing the
mode button and select default start mode with
on/off button.
(17) «Settings» – toggle through all modes until
you reach the option «Settings»;
to enter press the on/off button:
-> (19) manage Bluetooth settings (enable,
disable)
-> (20) select/change colour of Light Ring
-> (21) select/change language
-> (22) perform factory reset