Advertisement
Quick Links
Advertisement
Related Manuals for Zanussi ZGNN752X
Summary of Contents for Zanussi ZGNN752X
- Page 1 User Manual GETTING STARTED? EASY. ZGNN752X ZGNN755X EN User Manual...
- Page 2 VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.
- Page 3 WARNING: Unattended cooking on a hob with fat or oil can be • dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the • appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The appliance must not be supplied through an •...
- Page 4 SAFETY INSTRUCTIONS plug (if applicable) can make the terminal This appliance is suitable for the following markets: become too hot. • Use the correct electricity mains cable. GB IE MT • Do not let the electricity mains cable tangle. • Make sure that a shock protection is installed.
- Page 5 • All gas connections must be made by a qualified • Do not let cookware boil dry. person. • Be careful not to let objects or cookware fall on • Before installation, make sure that the local the appliance. The surface can be damaged. distribution conditions (nature of the gas and •...
- Page 6 SERVICE • Contact your municipal authority for information on how to dispose of the appliance. • To repair the appliance contact the Authorised • Disconnect the appliance from the mains Service Centre. Use original spare parts only. supply. • Cut off the mains electrical cable close to the DISPOSAL appliance and dispose of it.
- Page 7 this label in the package supplied with the appliance. If the supply gas pressure is changeable or different from the necessary pressure, you must fit an applicable pressure adjuster on the gas supply pipe. ADJUSTMENT OF MINIMUM LEVEL To adjust the minimum level of the burners: 1.
- Page 8 The hob has a terminal block which is marked as follows: • L — Live terminal • N — Neutral terminal • or E — Earth terminal Before carrying out the connection, make sure: 1. The limiter valve and the electrical system can take the appliance load (see the rating plate) 2.
- Page 9 REPLACEMENT OF THE CONNECTION ASSEMBLY CABLE The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar competencies, in accordance with the current regulations. To replace the connection cable use only H03V2V2-F T90 or equivalent type.
- Page 10 B. Supplied brackets If a furniture unit is installed at a distance of 400 mm above the hob, there must be a minimum safety distance of 50 mm to the left or right from the edge of the hob. CAUTION! Install the appliance only on a worktop with flat surface.
- Page 11 PRODUCT DESCRIPTION COOKING SURFACE LAYOUT Semi-rapid burner Multi Crown burner Rapid burner Auxiliary burner Control knobs CONTROL KNOB Symbol Description Symbol Description minimum gas supply no gas supply / off position ignition position / maximum gas supply DAILY USE WARNING! Refer to Safety chapters. BURNER OVERVIEW A.
- Page 12 IGNITION OF THE BURNER If the burner accidentally goes out, Always light the burner before you put turn the control knob to the off position on the cookware. and try to light the burner again after minimum 1 minute. WARNING! Be very careful when you The spark generator can start use open fire in the kitchen automatically when you switch on the...
- Page 13 CAUTION! Make sure that pot Diameter of cook- handles are not above the front edge Burner ware (mm) of the cooktop. CAUTION! Make sure that the pots Multi Crown 180 - 260 are placed centrally on the burner in order to get the maximum stability and Rapid 160 - 260 a lower gas consumption.
- Page 14 dirt can cause damage to the hob. Take care to components well clean to prevent difficult lighting avoid burns. and check that the burner crown holes are not • Remove when the hob is sufficiently cool: obstructed. limescale rings, water rings, fat stains, shiny metallic discoloration.
- Page 15 LABELS SUPPLIED WITH THE ACCESSORIES BAG Stick the adhesive labels as indicated below: MOD. MOD. MOD. TYPE PROD.NO. IP20 PROD.NO. PROD.NO. SER.NO. 0049 SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY A. Stick it on Guarantee Card and send this part C.
- Page 16 OTHER TECHNICAL DATA Gas original: G20 (2H) 20 mbar 12,0 kW TOTAL POW- Gas replace- G30 (3+) 28-30 mbar 825 g/h ment: G31 (3+) 37 mbar 811 g/h Electric supply: 220-240 V ~ 50-60 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse Appliance cate- II2H3+ gory:...
- Page 17 Data in the table is specified for Malta. ENERGY EFFICIENCY PRODUCT INFORMATION ACCORDING TO EU 66/2014 Model identification ZGNN752X Type of hob Built-in hob Number of gas burners Left rear - Semi-rapid 61.2% Right rear - Rapid 54.4% Energy efficiency per gas burner Centre middle - Multi Crown 54.7%...
- Page 18 ENVIRONMENTAL CONCERNS Return the product to your local recycling facility or Recycle materials with the symbol . Put the contact your municipal office. packaging in relevant containers to recycle it. Help protect the environment and human health by Electrolux Appliances AB - Contact Address: Al. recycling waste of electrical and electronic Powstańców Śląskich 26, 30-570 Kraków, Poland appliances.
- Page 20 WWW.ZANUSSI.COM/SHOP...