Adjusting The System Parameters; Using The System Parameters - Yamaha YRS-1000 Owner's Manual

This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
Note
When "F.PANEL KEY" is set to "F.PANEL: OFF" (see page 70), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON
on the remote control instead to adjust the system parameters.

Using the system parameters

Follow the procedure below to enter the system
parameters.
STANDBY/ON POWER POWER
AV TV
VCR DVD AUX
STB
TV
INPUT1 INPUT2 MACRO
TV
1
Press STANDBY/ON on the remote control to
turn off the power of this unit.
STANDBY/ON

Adjusting the system parameters

SURROUND SOUND TV STAND YRS–1 000
– +
INPUT VOLUME STANDBY / ON
CH LEVEL MENU
TV/AV
ENTER
YSP
TEST RETURN
Adjusting the system parameters
2
Press and hold INPUT on the front panel and
press STANDBY/ON on the remote control to
turn on the power of this unit.
"MEMORY PROTECT" is displayed in the front
panel display.
INPUT
3
Release INPUT on the front panel.
INPUT
4
Set the operation mode selector to YSP.
TV/AV
YSP
5
Use / to select the parameter to be set,
then press ENTER.
See the table on page 70 for the types of parameters.
ENTER
6
Use / to select and change the parameter
setting.
See the table on page 70 for the parameter settings.
ENTER
STANDBY/ON
ENTER
ENTER
69
En