Overview - LG VR6250LV Owner's Manual

Install the home station. (p14)
1
Insert the power cord plug into an outlet and locate the station
against a wall. If power is not supplied to the home station, the
Robot Cleaner will not charge.
Turn on the power supply of the Robot Cleaner.
2
(p15)
Turn ON the power switch on the rear-left of Robot Cleaner,
and press the 'Start/Stop' button on the top.
※ If the power supply is not turned on, refer to page 15.
Check the dust bin.
3
Check the cleanness of the dust bin before start cleaning and close
the cover of the dust bin on the main unit.
Start cleaning. (p16)
4
Press the START/STOP button once again while the Robot Cleaner
is turned on. You will hear the sound of cleaning and cleaning will
begin.
Automatic charge. (p17)
5
The Robot Cleaner will self-diagnose and automatically return to
the home station to recharge before the complete discharge of the
battery. It takes approximately three hours to charge the battery.
Use the cleaning mode and auxiliary functions. (p18~21)
6
Use the buttons on Robot cleaner and Remote Controller to use
each cleaning mode and supporting feature.
For Cleaning Mode, you can choose among ZigZag, Zone, and
Repeat; for secondary features, Manual and Microfi bre Mop (option).
< Warning > When Robot Cleaner is operated with the cover of the dust bin open,
it can cause an injury or serious damage to the product.

OVERVIEW

1.5 
2 
1.5 
13