Specifications - Black & Decker BDT30WTA Instruction Manual

SET UP & USE
GENERAL INFORMATION
Recommended humidity levels:
30%-50% (Too dry, less than 15%, too humid, greater than 50%)
During operation, it is normal for the exhaust coming from the side of the
dehumidifier to be warm.
Caused by preliminary factory testing, there may also be a small amount of water
present in the bucket before using the dehumidifier for the first time, which is normal.

SPECIFICATIONS

BDT30WTA
Dehumidifying capacity: 30 pints per day
Bucket capacity: 8.5 pints
Air flow volume (high/med/low): 215/180/155 CFM
Power: 115v, 60 Hz, 3.0A
Power consumption: 295 watts
BDT50WT
Dehumidifying capacity: 50 pints per day
Bucket capacity: 8.5 pints
Air flow volume (high/med/low): 215/180/155 CFM
Power: 115v, 60 Hz, 5.5 A
Power consumption: 490 watts
BDT70WT
Dehumidifying capacity: 70 pints per day
Bucket capacity: 16.9 pints
Air flow volume (high/med/low): 320/290/250 CFM
Power: 115v, 60 Hz, 8.1A
Power consumption: 730 watts
Page 14