GE 28821 Series User Manual page 84

This feature lets you to adjust the audio quality.
From the Handset Setup Menu:
1. Press the caller ID-volume (6 or 5) button to scroll to Equalizer.
2. Press the mute/menu OK button to enter the menu.
3. Use the caller ID-volume (6 or 5) button to scroll to desired selection. The default is Natural.
4. Press the mute/menu OK button to save your selection. You will hear a confirmation tone.
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
From the Handset Setup Menu:
1. Press the caller ID-volume (6 or 5) button to scroll to the RINGER TONE sub-menu.
2. Press mute/menu OK
setting.
3. Use the caller ID-volume (6 or 5) button to scroll to the desired setting (1 through 0). You will hear a sample
of the ringer tone/melody you select.
4. Press the mute/menu OK
ringer tone shows in the display.
NOTE: You must have the Ringer Volume set to ON for ring tone to signal an incoming call.
Ringer Volume
From the Handset Setup Menu:
1. Press the caller ID-volume (6 or 5) button to scroll to the RINGER VOLUME sub-menu.
2. Press mute/menu OK
3. Use the caller ID-volume (6 or 5) button to scroll to your selection.
4. Press the mute/menu OK
setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
VIP Melody
This features allows you to assign a specific melody to someone you want to get your attention when the person
calls. When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and
then follows with VIP melody ring. You may choose from ten different polyphonic melodies and may store up to 10
VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the memory. (Refer to Storing CID
Records in Internal Memory). NO USER MEMORY will show in the display to remind the user to do
CID record transfer first.
Storing VIP Melody
From the Handset Setup Menu:
1. Press the caller ID-volume (6 or 5) button to scroll to VIP MELODY sub-menu.
2 Press mute/menu OK
- If VIP1 does NOT contain any specific number/records, it will display EMPTY.
3. Press caller ID-volume (6 or 5) but ton to select the specific VIP melody memory location (10 VIP locations)
that does not contain any record.
4. Press mute/menu OK
NOTE: If the memory location does not contain any CID memory records and you are trying to mark a
specific record as VIP MELODY, then SELECT MEMORY will not be displayed. Instead, NO USER
MEMORY will display in prompt to alert the user.
5. Press caller ID-volume (6 or 5) button to view the records from memory to be selected as VIP.
button to enter the menu. SET RINGER TONE 01 shows in the display. 01 is default
button to save your selection. You will hear a confirmation tone and the selected
button to enter the menu. SET RINGER
button to save your selection. You will hear a confirmation tone and the new volume
button to select VIP melody feature and then display VIP 1 record.
button to display SELECT MEMORY .
LEVEL 5 shows in the display.
LEVEL 5 is the default setting.