Handset to Handset Paging
(applicable only with additional handsets)
1. Make sure the phone is OFF (not in TALK mode).
. Press and release the
EXTENSION? shows in the display.
. Use the touch-tone pad to enter the handset number you want to page.
. To cancel the page, press the END/cancel, delete/intercom/conf, or
on the originating handset, or press the
handset.
Paging All Handsets from a Handset
(applicable only with additional handsets)
1. Make sure the originating phone is OFF (not in TALK mode).
. Press and release the
EXTENSION? shows in the display.
. Use the touch-tone pad to enter the handset number you want to page. (1= to
page Handset 1, =to page handset , etc., and
. To cancel the page, press the END/cancel, delete/intercom/conf, or
on the originating handset, or press the
handset.
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and
PAGING FROM BASE shows on each handset's display.
. To cancel the page, press the page button on the base, or press the
or the
END/cancel
8
delete/intercom/conf
delete/intercom/conf
button on each handset.
button on a handset. PAGING
END/cancel
button on the receiving
button on a handset. PAGING
*
tone=to page all handsets)
END/cancel
button on the receiving
TALK
button
TALK
button
TALK
button