Table of Contents
Advertisement
Standby Screen
The handset displays the handset number and user name.
Programming Functions
The system uses a menu structure to give you access to all of the built-in features. You may program the
following items in main menu: Phone Book, Room Monitor,
Room Monitor
(applicable only with additional handsets)
1. Make sure your phone is OFF (not in TALK mode).
2. Press the
mute/menu OK
3. Press caller ID-volume (6 or 5) button to scroll to ROOM MONITOR.
4. Press
mute/menu OK
display.
5. Use the touch tone pad to enter the handset number to be monitored.
NOTE: When this phone system is expanded (up to 8 handsets by purchase of optional Model
28801 handset with recharge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET 3
and so on
respectively.
6. The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to
monitor sound from the receiving handset.
NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5
seconds if there is an incoming call. You may press the SPEAKER button to quit room monitor and
answer the call.
NOTE: While in room monitoring mode, the originating handset can be switched to monitor by
handset earpiece by pressing the
SPEAKER button once.
NOTE: Press the
END/cancel
Set Alarm Clock
1. Make sure your phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to go to the main menu.
3. Press caller ID-volume (6 or 5) button to scroll to ALARM.
4. Press mute/menu OK button to enter the submenu, ALARM 1ON 2OFF shows on the display.
5. Use the touch-tone pad to enter the selection, or use the caller ID-volume (6 or 5) button to scroll to 1ON or
2OFF.
6. If you select ON, press the mute/menu OK button to confirm and advance Set Alarm Time sub-menu.
7. Use the number keys to enter the time, then use the caller ID-volume (6 or 5) to select AM or PM.
button to go to the main menu.
button to enter ROOM MONITOR menu, ROOM MONITOR EXTENSION? shows in the
TALK
button once. Switch back to speakerphone by pressing the
button on the handset to exit room monitor mode.
Set Alarm Clock
and Handset Setup.
Advertisement
Table of Contents
