Table of Contents
Advertisement
sales@GlobalTestSupply.com
6 Using the product
2. Move
Joystick
scaling (
), min. value ( ), temperature range ( ) or max.
value ( )
-
The selected option has an orange border ( ).
3. With the selection of min. value, temperature range or max.
value: Move
-
Changes are applied immediately so that the effects on the
display of the infrared image can be checked directly.
4. Close dialogue with
-
The changes are saved.
6.1.4.
Display...
Select display options
The presentation can be adapted by means of showing/hiding the
following elements: Crosshairs, temperature scale and quick select
buttons.
Hidden function keys can be shown again by pressing a quick
select button: The first press of the button shows the function keys
again. To trigger a function, the button must be pressed again.
1.
[OK]
|
Display...
-
The
Display options
2. Move
Joystick
-
The selected option has an orange border ( ).
3. Activate (
4. Confirm settings with the
or
Discard settings with [Esc].
6.1.5.
Emissivity...
Emissivity
The emissivity describes the capability of a body to emit
electromagnetic radiation. This is material-specific and must be
adapted for correct measurement results.
Non-metals (paper, ceramic, gypsum, wood, paints and coatings),
plastics and food have high emissivity, which means that the
surface temperature can be easily measured using infrared.
Because of their low or non-uniform emissivity, bright metals and
metal oxides are only somewhat suited for infrared measurement.
You must anticipate highly inaccurate measurements. A remedy for
this is coatings that increase the emissivity, e.g. paint or emission
30
www.
left/right to select the desired option: Auto-
Joystick
up/down to change the value(s).
[OK]
or [Esc].
| [OK].
dialogue is opened.
up/down to select the desired option.
) or deactivate (
) option with [OK].
[Apply]
quick select button.
Testo-Direct
1.888.610.7664
.com
Advertisement
Table of Contents
