TESTO 875i Brief Instructions

Getting to know the quick select
buttons
Using the quick select buttons, the set functions are
called up directly. Factory settings:
Scale... Image type
➀
➁
Changing assignment of the quick
select buttons
Change the left or right quick select button:
Image type
Palette
1
Emissivity...
Scale...
2
Adjustment
3
➀
➁
Contact
GREAT BRITAIN / IRELAND
Testo Ltd.
Alton, Hampshire GU34 2QJ
Tel. (14 20) 54 44 33, Fax (14 20) 54 44
E-mail: info@testo.co.uk
USA
Testo Inc.
Flanders, NJ. 07836
Tel. (973) 2 52 17 20, Fax (973) 2 52 17 29
E-mail: info@testo.com
All manuals and user guides at all-guides.com
➀
Left quick select button : Adjust scaling.
➁
Right quick select button : Select image type.
Warning! Eye damage due to laser beam.
Do not look into the laser beam and do not point
the laser beam at people.
➀
Call up: Move Joystick to the left or right.
Navigate: Move Joystick up / down.
➀
Confirm: Press [OK] .
or
➁
Cancel: Press [Esc] .
AUSTRALIA
Testo Pty Ltd
Croydon South VIC 3136
Tel. (3) 98 00 46 77, Fax (3) 98 00 46 99
E-mail: info@testo.com.au
The most up-to-date address details of our subsidiaries and
agencies can be found in Internet at: www.testo.com
0971 8754 en 02 en
testo 875i · Thermal imager
Brief instructions
These short instructions
describe the basic operating
steps. Please refer to the
instruction manual to find out
how to handle the product
safely and for detailed
information.
You can find this at
www.testo.com in the
Downloads section of the
relevant product detail page.
Analysis software testo IRSoft
Use the testo IRSoft software to analyze your thermal images extensively and in
detail, and to create professional reports.
You can download the software free of charge and licence-free via the following
link:
www.testo.com/irsoft
en