Table of Contents
Advertisement
OPERATION
F5: Cancels the selection and returns the screen to "Machine Setting" menu screen.
F6: Allocates the selected setting to that of ATT/P or ATT/E mode.
Changing Attachment Setting name
You can change the name for the attachment setting to desired name.
You can use alphabet letters A to Z, Arabic numerals 0 to 9, symbols #, *, +, -, and /, and the space.
1.
Select a setting to change on the "Attachment Setting"
screen, then press the switch F1.
2.
"Attachment Name Setting" screen is displayed.
On the "Attachment Name Setting" screen, you can per-
form the following operations with switches F1 to F6.
F1: "CLEAR" Clears all the letters. (If some letters are left.)
F1: "DEFAULT" Displays the initial name. (If all the letters
are deleted.)
F2: Moves to the right letter.
F3: Moves to the next alphabet, numeral, or symbol.
F4: Moves to the previous alphabet, numeral, or symbol.
F5: Returns the screen to the attachment setting screen without changing the name.
F6: Enters the change and returns the screen to the attachment setting screen.
It is not possible to change the name for "No Attachment" setting.
Changing "Attachment Oil Flow Rate Setting"
1.
Select an attachment setting to change its oil flow rate on
the "Attachment Setting" screen, then press the switch F2.
2.
"Attachment Oil Flow Rate Setting" screen is displayed.
On the "2-Way Attachment Oil Flow Rate Setting" screen,
you can perform the following operations with switches F3
to F6.
F3: Decreases the flow rate by 1 level.
F4: Increases the flow rate by 1 level.
F5: Returns the screen to "Attachment Setting" screen
without changing the oil flow rate.
F6: Enters the oil flow rate setting and returns the screen
to "Attachment Setting" screen.
EXPLANATION OF COMPONENTS
3-71
Advertisement
Table of Contents
