Programming Mode - Renkforce IP65 Operating Instructions Manual

9. Programming mode

The master code ex works is "1234".
To enter the programming mode, enter the Master Code twice in succession.
Example: 1234 1234
As soon as the correct code is entered, the colour of the "red/yellow" LED (A) changes from
red to yellow.
You are now in programming mode and can make the settings described in the following.
The programming mode can be exited using the "#" button.
9.1 Setting the Master Code
Enter the following key combination in programming mode to assign a new Master Code:
00 MMMM
MMMM in this case stands for the 4 digit combination of numbers you wish to assign as the
Master Code.
9.2 Setting the user password
Enter the following key combination in programming mode to assign a new user password:
Input combination for user 01 to 19:
XX UUUU
Input combination for user 20 to 39:
6 XX UUUU
Input combination for user 41 to 99:
6 XX UUUU
XX in this case stands for the desired user.
UUUU in this case stands for the 4 digit combination of numbers of the desired user password.
26