Intended Use; Delivery Content - Renkforce IP65 Operating Instructions Manual

3. Intended use

This code lock is designed to secure doors against unauthorised entry (e.g. office, lobby areas
etc). A maximum of 99 users with different codes can be saved to the unit. It is suitable for
connection to electric door openers which have an operating voltage of 12 to 24 V (AC/DC).
In addition this code lock has an Alarm Outlet (3) (circuitboard label: "AL OUT"; e.g. for con-
necting a door magnet contact NC) and an Alarm Inlet (5) (circuitboard label: REED; e.g. for
connecting a door magnet contact NC).
The code lock is to be operated solely with 12 to 24 V (AC/DC) voltages. The code lock is manu-
factured to protection category IP65 and is therefore appropriate for unprotected outdoor areas.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits or other hazards. Read the instructions care-
fully and store them in a safe place. Make this product available to third parties only together
with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

4. Delivery content

• Code lock
• Operating instructions
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
20