Rampage ACD-13CS Owner's Manual page 4

The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you
do, we're here to help you. Just call our toll-free telephone assistance line at 1-800-645-4994 during the days
and hours shown (U.S.A. and Canada only).
DAY
MON. - FRI.
SATURDAY
SCREW
(5MM)
FASTEN THIS END TO SECURE
PART OF DASHBOARD.
DRILL HOLE IF NECESSARY.
NOTE: PLASTIC FRAME MUST BE REMOVED (UNSNAP ON LEFT
FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE
MOUNTED WITHIN 20° OF HORIZONTAL. MAKE SURE THE UNIT IS
MOUNTED WITHIN THIS LIMITATION.
REMOVE THE PLASTIC FRAME FROM THE FRONT OF THE CHAS-
SIS BY CAREFULLY UNSNAPPING IT.
4 4 4 4 4
3 3 3 3 3
T T T T T OLL-FREE INST OLL-FREE INST OLL-FREE INST OLL-FREE INST OLL-FREE INSTALL
PACIFIC
5:30AM - 4PM
6AM - 2PM
UNIVERSAL INSTALLATION USING MOUNTING SLEEVE UNIVERSAL INSTALLATION USING MOUNTING SLEEVE
UNIVERSAL INSTALLATION USING MOUNTING SLEEVE UNIVERSAL INSTALLATION USING MOUNTING SLEEVE UNIVERSAL INSTALLATION USING MOUNTING SLEEVE
NUT (5MM)
PERFORATED STRAP
FASTEN THIS END TO SCREW
STUD ON REAR OF CHASSIS
MOUNTING SLEEVE
AND RIGHT SIDES) TO USE REMOVAL TOOLS.
CAUTION:
UNSNAP ON LEFT AND
RIGHT SIDES
PLASTIC FRAME
ALL ALLA A A A A T T T T T ION ASSIST ALL ALL ION ASSIST ION ASSIST ION ASSIST ION ASSISTA A A A A NCE
TIME ZONE
MOUNTAIN
7:30AM - 6PM
6:30AM - 5PM
7AM - 3PM
EXISTING DASH OPENING
FILE EDGES TO FIT IF NECESSARY - DO NOT OVERFILE
NOTE: IF DASH IS SOLID, USE REAR SIDE (WITHOUT THE LIP) OF
MOUNTING SLEEVE AS A TEMPLATE & CUT OPENING
RADIO
SCREW STUD
REMOVAL TOOLS
ISO INSTALLATION ISO INSTALLATION ISO INSTALLATION ISO INSTALLATION ISO INSTALLATION
MAXIMUM
SCREW SIZE
M5 x 6
FACTORY MOUNTING
BRACKETS
NCE NCE NCE NCE
CENTRAL EASTERN
8:30AM - 7PM
9AM - 5PM
8AM - 4PM
BEND TOP
TABS UPWARD
BEND BOTTOM
TABS DOWNWARD
SIDE VIEW
OF
CHASSIS
TYPICAL INSTALLATION
20° MAX.
FRONT PANEL
MAXIMUM
SCREW SIZE
M5 x 6