More About This Unit - JVC KD-R302 Instructions Manual

Hide thumbs Also See for KD-R302:
Table of Contents

Advertisement

Available languages

Available languages

Category Menu items
BEEP
Keypress tone
TEL MUTING
Telephone
muting
AMP GAIN *
8
Amplifier gain
control
AM *
9
AM station
AUX IN *
10
Auxiliary input
*
The volume level automatically changes to "VOLUME 30" if you change to "LOW POWER" with the volume level
8
set higher than "VOLUME 30."
*
9
Displayed only when any source other than "AM" is selected.
*
Displayed only when any source other than "AUX IN" is selected.
10

More about this unit

Basic operations
Turning on the power
• By pressing SRC button on the unit, you can also turn
on the power. If the source is ready, playback also
starts.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
General
• If you change the source while listening to a disc,
playback stops.
Next time you select "CD" as the playback source,
playback will start from where it had been stopped
previously.
Selectable settings, [reference page]
• BEEP OFF
: Deactivates the keypress tone.
• BEEP ON
: Activates the keypress tone.
• MUTING 1/
: Select either one which mutes the sounds while using a
MUTING 2
cellular phone.
• MUTING OFF
: Cancels.
• LOW POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
• HIGH POWER
: VOLUME 00 – VOLUME 50
• AM OFF
: Disable "AM" in source selection.
• AM ON
: Enable "AM" in source selection, [4].
• AUX OFF
: Disable "AUX IN" in source selection.
• AUX ON
: Enable "AUX IN" in source selection, [4].
• After ejecting a disc, "NO DISC" appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
• If no operation is done for about 30 seconds after
pressing MENU button, the operation will be
canceled.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– When SSM is over, the station stored in the lowest
preset number will be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
SETTINGS & REFERENCES
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-r303Kd-r301Kd-r301e

Table of Contents