Page 1
SAT305 AIR SHEAR OWNER’S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.
Page 2
Tool attachments can become loose or Make sure that any attachments are se- break and fly apart, propelling articles at curely assembled. the operator and others in the work area. WWW.SGS-ENGINEERING.COM PAGE 2 PAGE 3...
Page 3
Air tools can inadvertently propel fasten- Use only parts, fasteners and accessories ers or other materials in work area. recommended by SGS Engineering. INHALATION HAZARD Keep work area clean and free of clutter. Keep children and others away from tool...
Page 4
8. Check hoses for wear before individual use. Make certain that all con- repaired before use. nections are securely fastened. Use only accessories identified by SGS En- Use of an accessory not intended for a gineering as suitable for use with specific specific tool increases the risk of injury to tools.
Page 5
1. Place the shear against the side of the sheet metal you want to cut. The tool should be lubricated before each use with air tool oil (not in- cluded). Air tool oil is available from SGS Engineering. During continuous 2. Squeeze the trigger to start the metal shear.
Page 7
SGS Engineering (UK) Ltd West Side Park Raynesway Derby, DE21 7AZ EC Declaration of Conformity This is an important document and should be retained MANUFACTURER’S NAME: SGS Engineering (UK) Ltd AIR SAW TYPE OF EQUIPMENT: SAT305 PART NUMBER: APPLICATION OF EC COUNCIL DIRECTIVES / STANDARD:...
Need help?
Do you have a question about the SAT305 and is the answer not in the manual?
Questions and answers