How To Store - KNOVA KN 9832-G Manual

MAINTENANCE
WARNING
Water pressure produced by this unit can cut through skin
and tissue leading to serious injury and possible amputation.
• Never attempt to repair high pressure hose, always replace.
• Never attempt to repair leaks with sealant, always replace
Oring or seal.
REPAIRING LEAKING CONNECTIONS
• Purchase O-Ring / Maintenance kit through the nearest
authorized service center and follow instructions provided with
kit.
AIR FILTER
A dirty air filter will reduce the life span of the engine, make
starting the engine difficult, and reduce the unit's performance.
• To clean, remove the air filter cover.
• Carefully pull the air filter out by lifting up along the edges.
• Remove dirt from filter by tapping on it or having it blown out.
• Reinstall air filter so that it seals and replace air filter cover.
WARNING
Storage cover could be flammable. Let engine cool before
covering pressure washer.
STORING PRESSURE WASHER
If storing pressure washer for 30 days or more follow the below
procedures:
• Add fuel stabilizer to gasoline to keep gasoline from going
staleand to prevent gum deposits from forming on the carburetor.
Run engine for a couple of minutes to circulate the fuel stabilizer.
• Add PumpSaver to protect pump from freezing or damage
caused by mineral deposits.
• Empty fluid from all hoses, detergent bucket, and the pump.
• Disconnect the spark plug wire and clean the spark plug.
Leave spark plug wire disconnected.
• Clean the air filter.
• Cover unit with a suitable protective cover to keep unit dry.
• Store unit in a frost-free area.
NOTAS
11