How To Select Spray Nozzle - KNOVA KN 9832-G Manual

OPERATION
USING AND SELECTING SPRAY TIPS
(SEE FIG 12 & 13)
• To connect or disconnect spray tip, pull back on the quick
connect collar. Insert or remove spray tip then release collar.
• When spray tip is connected, pull on the spray tip to make
sure it is secured.
• For gentle cleaning and rinsing use the 40º spray tip. This
option is for cleaning cars, motorcycles, boats, RV's outdoor
furniture, lawn equipment, and grills.
• For general cleaning use the 25º spray tip. This option is for
cleaning house siding, decks, garage floors, brick patios, and
cement walkways.
• For stripping use the 15º spray tip. This option is for removing
paint, rust, mildew, marine growth off boats, or grease stains.
• For blasting, spot cleaning or hard to reach areas use the 0º
spray tip. This option can be used for reaching second story
surfaces, or for the removal of paint, rust, oil stains, tar, gum,
and other stubborn substances. Use extreme caution when
using this nozzle.
• For applying pressure washer safe detergent, use the black
soap nozzle. Connect the siphon tube with strainer to the brass
barb located on the high pressure hose connection. Submerge
the strainer end of the siphon tube in the solution that is to be
applied.
"Click"
Siphon tube
Spray wand
Nozzle
Fig. 12
Fig. 13
RINSING WITH THE PRESSURE WASHER
• Select and install appropriate spray tip as described earlier in
this manual.
• Test a small area first to avoid surface damage.
• Rinse from top to bottom using long, overlapping strokes.
MOVING THE PRESSURE WASHER (SEE FIG 14)
• Turn the pressure washer off.
• Tilt unit towards you until it is balanced on its wheels.
• Roll machine to desired location.
9
Fig. 14