Table of Contents
Advertisement
The oven can be programmed to:
• Bake normally
• Time bake
• Speed bake
• Vari Broil
• Self-clean
IMPORTANT: The control cannot be used until the clock is set to the time of day.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME
. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold STOP TIME
again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit). The oven can be programmed for any temperature from
170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push VARI BROIL
. "— — —" appears in the display.
2. Push and hold the UP ARROW
until "HI" appears in the display.
3. Push and hold VARI BROIL
until °F or °C appears in the display.
4. Push the UP
or DOWN
ARROW to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
ELECTRONIC OVEN CONTROL
2
Advertisement
Table of Contents
