Abocom AP700C User Manual page 32

SNMP Setup
Server
Trust Host IP
Trust Trap IP
Agent Port
Read Community
Write/ReadCommunity
Trap Port
Trap Community
Trap Version
Click the radio button to enable/disable the SNMP
server. You have to enable this function first to set
the following settings.
Enter the IP address of the NMS (Network
Monitoring Stations). The NMS is the only host PC
that is allowed to access this AP. If this filed is left
blank, it means that every host PC is allowed to
access the AP if only its "Community string" is
correct.
Enter the IP address of the SNMP Trap Receiver.
Leave it blank to disable the SNMP trap function.
Enter the SNMP listening port.
Enter the communicty string for the NMS to read only this
AP's MIB.
Enter the communicty string for the NMS to read/write this
AP's MIB.
Enter the remote Trap Receiver port.
Enter a trap community string that is used as a
password for the Trap Receiver.
SNMP Trap version 1 and 2 are both supported. Select
your preference.
29