Table of Contents
Advertisement
Channel Number:
Encryption
Associated Clients
BSSID
TCP/IP Configuration
IP Protocol
br0 IP Address
br0 Subnet Mask
br0 Default Gateway
br0 MAC Address
System Log
This page display log events with time when events happened, log events' types, log
sources and the description for events themselves. System manager can use the system log
to trace when problems occur.
Display the method to get the IP of this AP, which could be
obtained by Fixed-IP or DHCP-client.
Current IP address for this Access Point
Current Subnet mask for this Access Point
Default Gateway for this Access Point
The MAC Address for this Access Point
12
WLAN must use the same SSID. It is case-
sensitive and must not exceed 32 characters.
A device will not be permitted to join the
BSS unless it can provide the unique SSID.
An SSID is also referred to as a network
name because essentially it is a name that
identifies a wireless network.
The number of channels supported depends
on the region of this Access Point. All
stations communicating with the Access
Point must use the same channel.
WEP
Encryption
Privacy) is set to Disabled by default. When
WEP is enabled, data packet is encrypted
before being transmitted. The WEP prevents
data packets from being eavesdropped by
unrelated people. By using WEP data
encryption, there may be a significant
degradation of the data throughput on the
wireless link.
Displays the total number of clients
associated to this AP. You can have up to 64
clients to associate to this Access Point.
BSSID displays the ID of current BSS,
which uniquely identifies each BSS. In AP
mode, this value is the MAC address of this
Access Point.
(Wired
Equivalent
Advertisement
Table of Contents
