Site Survey - Abocom AP700C User Manual

Enable Wireless Access
Control
MAC Address
Comment
Apply Change
Reset
Delete Selected
Delete All
Reset

Site Survey

Site survey displays all the active Access Points and IBSS in the neighborhood. When you
are in the client mode, you can select one AP to associate.
Press Refresh to get the latest information.
Check the checkbox to enable this function.
Enter the MAC Address of a station that is allowed to access
this Access Point.
You may enter up to 20 characters as a remark to the
previous MAC Address.
Press to save the new settings on the screen.
Press to discard the data you have entered since last time
you press Apply Change.
To delete clients from access to this Access Point, you may
firstly check the Select checkbox next to the MAC address
and Comments, and press Delete Selected.
To delete all the clients from access to this Access Point,
just press Delete All without selecting the checkbox.
If you have made any selection, press Reset will clear all the
select mark.
23