Initializing The Disc - Canon DC40 Instruction Manual

Initializing the Disc

You need to initialize a DVD-RW disc when first inserting it into the camcorder and you
may have to initialize a disc if you get the "DISC ERROR" message. You can also choose
to initialize the disc if you wish to erase all the recordings on the disc or in order to change
the disc specification.
Initializing the disc will erase all recordings, even if the disc is protected. The
original recordings cannot be recovered.
Initialize all DVD-RW discs before using them with this camcorder.
MENU
( 79)
1. Set the camcorder either to record or play movies or to record or view
still images on the disc (
2. Press the MENU button.
3. Use the multi selector (
menu and then select the [DISC INITIALIZE] option.
4. Select (
• [VIDEO] mode: Most DVD players will play the disc, but except for the disc title, the
recordings cannot be edited with the camcorder.
• [VR] mode: You will have the option to edit the recordings with the camcorder, but
the disc can only be played in VR mode-compatible DVD players and computer DVD
drives.
5. You will be asked to confirm the disc specification you selected.
Select (
Select [NO] and press (
6. Select (
The disc initialization will take approximately one minute. Avoid moving the camcorder
while the operation is in progress.
7. Once the [DISC OPERATIONS] menu is displayed, press the MENU
button to close the menu
90
DISC OPERATIONS
/ ).
) the disc specification and press (
) [YES] and press (
) to return and select a different disc specification.
) [YES] and press (
DISC INITIALIZE
,
, ) to select the [DISC OPERATIONS]
) to continue.
) to initialize the disc.
, /
).
or