Protecting Still Images On The Memory Card - Canon DC40 Instruction Manual

Protecting Still Images on the Memory
Card
You can protect still images recorded on the memory card from accidental erasure while
displaying a single image or from the index screen.
Initializing the memory card (
images, even the protected ones.
Protecting a Single Image
( 60)
1. Set the camcorder to view still images recorded on the memory card
(
2. Press the FUNC. button.
The option is also available while recording still images (
press the FUNC. button while reviewing the still image (
selected for the [REVIEW] setting (or immediately after recording it, if set to [OFF]).
3. Select (
4. Select (
To cancel the protection, select [OFF].
5. Press the FUNC. button to close the menu.
" " appears, and now the image cannot be erased.
Protecting Still Images from the Index Screen
MENU
( 79)
1. Set the camcorder to view still images recorded on the memory card
(
2. Move the zoom lever toward W.
The stills index screen appears with up to six still images.
3. Press the MENU button and use the multi selector (
the [STILL IMG OPER.] menu and then select the [
option.
4. Bring (
press (
• " " appears on the image.
• To cancel the protection, press (
5. Press the MENU button to close the menu and return to the index
screen.
96
PROTECT
/ ).
) the [ PROTECT] symbol and press (
) [ON] and press (
STILL IMG OPER.
/ ).
, ) the cursor
). Repeat this step to select other images as desired.
97) will permanently erase all recorded still
) to protect the still image.
PROTECT
to the image you want to protect and
) again.
) but only if you
81) within the time
).
, ) to select
PROTECT]