Selecting A Fader - Canon DC40 Instruction Manual

Multi-Image Screen (
Captures moving subjects as a sequence of 4, 9 or 16 still images and displays them as
one split screen. Sound will be recorded normally.
4 split images
Card Mix (
Combines a still image from the memory card with your recording.
Turn off the digital effects [D.EFFECT OFF] when you are not using them.
The camcorder retains the setting last used even if you turn off the digital effects
or change the recording program. However, you will need to select again the
still image for the Card Mix effect.

Selecting a Fader

( 60)
1. Set the camcorder to record movies (
dial to a position other than
2. Press the FUNC. button.
3. First, select (
from the left side column and then select (
[ FADER] option from the bottom bar and press
( ).
4. Select (
The selected fader will be demonstrated on the current screen and will also be shown
in a small animation at the right corner of the bottom bar.
5. Press the FUNC. button to save the setting and close the menu.
The symbol of the selected fader appears.
6. Press the D.EFFECTS button.
• The symbol changes to green and the fader is activated.
• Pressing the D.EFFECTS button again deactivates the fader.
7. Fade in: Press the start/stop button in record
Fade out: Press the start/stop button in record
72
73)
9 split images
74)
D.EFFECT OFF
) the current digital effects symbol
) a fader from the list.
pause mode.
mode.
16 split images
.
) the
) and set the mode