panas TX-51P100X Service Manual page 6

Note: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be
reconnected using jumper leads if necessary before power is applied to Receiver for service.
Ornament Panel
1. The Ornament Panel is secured by (3) striker pins.
Grip the Ornament Panel at the side corner pull to
remove.
Ornament Panel
Cabinet ( Top )
1. Remove (11) Screws
Top Cabinet
(11) Screws
All manuals and user guides at all-guides.com
Speaker Grille
1. Remove (2) screws.
(11) Screws
Speaker Ass's
1. Remove (10) screws.
- 6 -
Speaker Grille
(2) Screws
(10) Screws