Table of Contents
Advertisement
17. Push the "0" of 10 key buttons, and return to Con-
vergence Adjustment mode.
18. Push the "PIP" button and change to the Green
Adjustment Colour.
Note:
When changing one CRT, do not use the Adjust-
ment Sheet, use the White (when changing the
Green Tube), Yellow (when changing the Red
Tube) or Cyan (when changing the Blue Tube)
Adjustment Colour.
19. If errors occur in the Convergence Data, and you
have cleared the initial data using the "RECALL
[
]" button, adjust the data separately for each
colour (R,G and B).
<Green Convergence Adjustment>
20. Select the "G-LINE CURSOR" mode by pushing
"TV/AV" button on the remote control.
G-LINE
CURSOR
[
]
G-LINE
CURSOR
Position
Buttons
Green crosshatch pattern
Convergence Adj. sheet lines
(Adjust points = All cross points)
21. Use the Position Buttons to move the cursor to the
point where you wish to change the data (adjust-
ment lines). Then use the "SOUND MUTE [
change from "G-LINE CURSOR" to "G-LINE
DATA".
All manuals and user guides at all-guides.com
]" to
- 27 -
22. Use the Position Buttons to adjust each point (line)
so that the Green Crosshatch Pattern is aligned
with the vertical and horizontal lines of the Conver-
gence Adjustment Sheet.
23. Push the "SOUND MUTE [
LINE DATA" to "G-LINE CURSOR".
24. Repeat step 21~23 to adjust the vertical lines (13)
and the horizontal lines (9).
25. Select the "G-EASY2 CURSOR" mode by pushing
"TV/AV" button on the remote control.
26. Use the Position Buttons to move the cursor to the
point where you wish to change the data (adjust-
ment point). Then use the "SOUND MUTE [
change from "G-EASY2 CURSOR" to "G-EASY
DATA".
27. Use the Position Buttons to adjust each point so
that the Green Crosshatch Pattern is aligned with
the vertical and horizontal lines of the Conver-
gence Adjustment Sheet.
28. Push the "SOUND MUTE [
EASY2 DATA" to "G-EASY2 CURSOR".
29. Repeat step 26~28 to adjust the 35 adjustment
points.
G-EASY2
CURSOR
[
]
G-EASY2
Position
Buttons
Green crosshatch pattern
Convergence Adj. sheet lines
(Adjust points = 35 points)
]" and switch from "G-
]" to
]" and with from "G-
DATA
Advertisement
Table of Contents
