Related Manuals for Artecta Display Track Fresnel 20 SW V1
Summary of Contents for Artecta Display Track Fresnel 20 SW V1
- Page 1 USER MANUAL ENGLISH Display Track Fresnel 20 SW Product code: A0320140 – Black housing A0320141 – White housing Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Display Track Fresnel 20 SW Preface Thank you for purchasing this Artecta product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Display Track Fresnel 20 SW Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 LEDs Lifespan ............................... 3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety .................................. -
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Artecta Display Track Fresnel 20 SW (including track adapter) ● Barndoor ● Color frame ●... -
Page 5: Symbols And Signal Words
Display Track Fresnel 20 SW Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 6: Safety
Display Track Fresnel 20 SW Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions DANGER Danger for children... - Page 7 Display Track Fresnel 20 SW Attention Power supply Before connecting the device to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the device. Attention General safety ●...
-
Page 8: Requirements For The User
Display Track Fresnel 20 SW Requirements for the User This product may be used by ordinary persons. Maintenance may be carried by ordinary persons. Installation and service shall be carried out only by instructed or skilled persons. Contact your Highlite dealer for more information. -
Page 9: Description Of The Device
Display Track Fresnel 20 SW Description of the Device The Artecta Display Track Fresnel 20 SW is a compact spot suitable for indoor venues, featuring two selectable color temperatures: warm white and cold white. It has manual zooming and a built-in, manually controllable dimmer (5 –... -
Page 10: Product Specifications
Display Track Fresnel 20 SW Product Specifications Model: Display Track Fresnel 20 SW Electrical: Input voltage: 100–240 V AC, 50/60 Hz Power consumption: 20 W PFC: 0,93 Fuse: F1 AL, 250 V AC Physical: Dimensions: 231 x 165 x 275 mm (L x W x H) (with track adapter) Weight: 1,6 kg (with track adapter) Track adapter:... -
Page 11: Dimensions
Display Track Fresnel 20 SW Dimensions Fig. 04 Installation and Deinstallation Safety Instructions WARNING Incorrect installation and deinstallation can cause serious injuries and damage of property. Installation and deinstallation of the device must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning electrical installations in buildings and working at heights. -
Page 12: Mounting
Display Track Fresnel 20 SW Mounting The device can be mounted only to a 3-phase track system. CAUTION Restrict the access under the work area during mounting. To mount the device, follow the steps below: 01) Make sure that the circuit selector (03) is in OFF position and the track lock (02) is in unlocked position, as shown in Fig. -
Page 13: Direction Adjustment
Display Track Fresnel 20 SW 05) Select the circuit with the circuit selector (03). You can select 1-, 2- and 3-phase circuit, as shown in Fig. 09. Attention Do not slide the track adapter in the track to adjust the position of the device (see Fig. 10). This can damage the connectors. -
Page 14: Barndoor Installation
Display Track Fresnel 20 SW Barndoor Installation The Display Track Fresnel 20 SW is delivered with a barndoor. To install the barndoor, follow the steps below: 01) Push the spring-loaded screw (09) and at the same time lift and flip backwards the color frame clip (08) (see Fig. -
Page 15: Dismounting
Display Track Fresnel 20 SW Dismounting CAUTION Restrict the access under the work area during dismounting. To dismount the device, follow the steps below: 01) Set the color temperature switch (14) to OFF position to turn the device off. 02) Let the device cool down before dismounting. 03) Make sure that the circuit selector (03) is in OFF position, as shown in Fig. -
Page 16: Operation
Display Track Fresnel 20 SW Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is intended for professional use as an architectural light spot. It is suitable for indoor installation in shops, exhibition halls, showrooms and similar venues. -
Page 17: Troubleshooting
Display Track Fresnel 20 SW Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. -
Page 18: Basic Cleaning Instructions
Display Track Fresnel 20 SW Basic Cleaning Instructions The external lens of the device must be cleaned periodically in order to optimize the light output. The cleaning schedule depends on the conditions at the site where the device is installed. When smoke or fog machines are used at the site, the device will need more frequent cleaning. -
Page 19: Transportation And Storage
Display Track Fresnel 20 SW Transportation and Storage Instructions for Transportation ● Use the original packaging to transport the device, if possible. ● Always observe the handling instructions printed on the outer carton box, for example: “Handle with care”, “This side up”, “Fragile”. Storage ●... - Page 20 ©2020 Artecta...
Need help?
Do you have a question about the Display Track Fresnel 20 SW V1 and is the answer not in the manual?
Questions and answers