Panasonic Lumix DC-TZ95 Operating Instructions Manual page 89

Table of Contents

Advertisement

Recording motion pictures by setting the aperture/shutter speed/ISO sensitivity (Creative Video Mode)
4
3
Repeat step
Crop end frame
• The setting of [AF Mode] switches to [
Eye Detection cannot be used.)
5
Press the motion picture button (or shutter button) to
start recording
Elapsed recording time
Set operating time
• Immediately release the motion picture button (or shutter button)
after pressing it.
• When the set operating time has elapsed, recording
automatically ends. To end recording midway, press the motion
picture button (or the shutter button) again.
When you want to zoom in/out, set different angles of view for the cropping start and end
frames. For example, to zoom in, set a larger angle of view for the start frame and a smaller
angle of view for the end frame.
Changing the position and size of a crop frame
Press [Fn1] button while the recording screen is displayed, and perform steps
To cancel [4K Live Cropping] recording
Set [OFF] in step
The angle of view narrows.
[4K Live Cropping] recording cannot be performed when [High Speed Video] is set.
Focus is adjusted and fixed in the crop start frame.
[Continuous AF] is set to [OFF].
[Metering Mode] will be [
You cannot zoom in/out during [4K Live Cropping] recording.
89
, and then set the crop end frame
2
.
] (Multi Metering).
] (Face Detection). (The
Recording mode
End
End
Size
Size
Reset
Reset
3
4
and
Set
Set
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-tz96Lumix dc-tz97

Table of Contents