Sending pictures to AV device
Still pictures and motion pictures can be sent to AV devices in the home (home AV
devices), such as DLNA compatible recorders.
→
[Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
→ [AV device]
1
Select [Via Network] or [Direct] to connect
2
Select the device you wish to connect to
3
Check the send settings, and select [Set]
• To change the send setting, press the [DISP.] button.
[Send Images While Recording]
4
Take a still picture
[Send Images Stored in the Camera]
4
Select the picture
●
Sending may fail depending on the operational status of the AV device. Also, sending may take a
while.
●
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
257
Wireless access point
(→252)
(→253)
Home AV device
(→267, 270)
(→254)
Wi-Fi/Bluetooth