Adjusting The Focus Manually - Canon 10 Instruction Manual

Adjusting the Focus Manually

Autofocus may not work well on the following subjects:
E
Reflective surfaces
Through dirty or
wet windows
CAMERA
1. Set the program selector to
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
"MF" appears.
4. Turn the focus ring to adjust the focus.
• Turn the focus ring up or down until the image appears
focused.
5. Press the FOCUS button to return to autofocus.
The setting resets to autofocus when you switch the program selector to [.
76
Subjects with
low contrast
(e.g. White Wall)
Different Distances
PLAY (VCR)
Q
.
Fast Moving Subjects
Dark Subjects
CARD CAMERA
Horizontal Stripes
Night Scenes
CARD PLAY (VCR)