Table of Contents
Advertisement
Reference Manual for the 108 Mbps Wireless Firewall Router WGR624v3
The Router's Front Panel
The front panel of the WGR624v3 router contains the status lights described below.
Figure 2-1: WGR624v3 Front Panel
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1.
Status Light Descriptions
Label
Activity
Power
On Amber Blinking
On Green Solid
Off
Solid Amber
Test
On
Off
Wireless
On
Off
Internet
On
Blink
LAN
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
2-6
Description
Power is supplied to the router and it is performing its diagnostic test.
Power is supplied and the router it has passed its diagnostic test.
Power is not supplied to the router.
The router has failed its diagnostic test.
The unit is performing the power on self test diagnostic.
The unit successfully completed the power on self test diagnostic.
The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
June 2004 202-10036-01
Introduction
Advertisement
Table of Contents
