Digital Watchdog DWC-B6263WTIR Quick Start Manual

DW® Universal HD over Coax® bullet cameras
DWC-B6263WTIR
WHAT'S IN THE BOX
Mounting
Star wrench 1
Torx Wrench template DC Plug Cable
Torx Wrench DC Plug Cable
Screws and
DC plug
1 plastic anchors
cable
- 4pcs
Torx Wrench DC Plug Cable Test Video Cable
Template Sheet Manual
Moisture
Template Sheet Manual
Test video absorber and
1
cable absorber guide
Torx Wrench
(recommended)
Sunshield cover &
ench DC Plug Cable Test Video Cable
Screw &
Template Sheet Manual
Sunshield
cover and Quick setup
1 set
adjusting guide
screws
Sunshield cover &
ble Test Video Cable
Template Sheet
Screw & Moisture absorber &
Sheet Manual
NOTE: Download all your support materials and tools in one place. Absorber Guide
1. Go to: http://www.digital-watchdog.com/resources.
2. Search your product by entering the part number in
the 'Search by Product' search bar. Results for
Screw & Moisture absorber &
applicable part numbers will populate automatically
Absorber Guide
based on the part number you enter.
3. Click 'Search'. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
Attention: This document is intended to serve as a quick reference for initial
setup. It is recommended that the user read the entire instruction manual for
complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday through Friday
Quick Start Guide
STEP 1 – PREPARING TO MOUNT THE CAMERA
1. The mounting surface must withstand five times the camera weight.
2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may cause a short or fire.
3. Install the moisture packet in the base of the camera's lens.
a. Remove the moisture absorber from the packaging.
b. Cut the card and folder along the dotted line.
c. Place the moisture absorber behind the camera's lens module. See drawing for more information.
Torx Wrench DC Plug Cable Test Video Cable WARNING:
Sunshield cover & 1
Test Video Cable
Sunshield cover &
Test Video Cable
Screw &
Template Sheet Manual
1 set
Sunshield cover &
Screw & Moisture absorber &
Absorber Guide
Screw & Moisture absorber &
Absorber Guide
1
Sunshield cover &
DC Plug Cable
Test Video Cable
Moisture absorber &
Absorber Guide
4. Using the mounting template sheet or the camera itself, mark and drill
1
the necessary holes in the wall or ceiling.
Screw & Moisture absorber &
Manual
Absorber Guide
STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES
Pass the wires through the mount bracket and make all necessary connections. Connect the BNC cable and power cables to the camera.
digital-watchdog.com
NOTE: The camera will generate enough heat to dry moisture
during operation. In most cases it will not need the
moisture absorber for more than the first day. In cases
where the camera can experience a moisture issue,
users must keep the moisture absorber in the camera.
The moisture absorber has an approximately 6-month
life cycle, varying depending on the environment.
Sunshield cover &
It is highly recommended that you install the moisture
absorber when mounting the camera. The moisture
absorber prevents moisture from being captured
inside the camera's housing, which may cause image
performance issues and damage the camera.
Moisture absorber &
Absorber Guide
Please cut the card type absorber along
Please cut the card type absorber along
a dotted line, overlap and attach them
a dotted line, overlap and attach them
according to the direction of the arrow.
according to the direction of the arrow.
Power Requirements
DC12V/AC24V dual voltage
Quick Start Guide
Power Consumption
DC12V (LED off): 3.0W
DC12V (LED on): 4.44W
AC24V (LED off): 2.7W
AC24V (LED on): 4.3W