Faults
The display panel/
indicator lights do not
work while the appliance
is running.
There is detergent
residue on the laundry.
- P - appears on the
display panel when the
cycle is paused.
- P - and ÿ appear on
the display panel when
the cycle is paused.
If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is
required:
Switch off the appliance and pull the mains plug out of the socket.
■
Turn off the tap and call the after-sales service.
■
Cause/remedy
Has there been a power failure?
■
Have the fuses blown/has the circuit breaker tripped? Switch on the circuit
■
breaker/replace the fuses.
If the fault occurs repeatedly, call the after-sales service.
■
Some phosphate-free detergents contain water-insoluble residue.
■
Select ' Rinse or brush the laundry after washing.
■
The water level is too high. It is not possible to add laundry. Close the door
■
immediately, if necessary.
Press the A button to resume the programme.
■
The door is unlocked. It is possible to add laundry.
Faults and what to do about them.
en
63