Status Led Setting; Set Time And Daylight Saving - aguri DX4000 User Manual

To save your settings, press the 'return arrow' followed by the 'X' to return to the
standby screen. If there is no activity for 60 seconds, your DX4000 will save your
setting and return to the standby screen automatically.
Please note that this feature will only work if you have a rear camera
connected. Please visit www.aguriworld.co.uk or call 0330 102 5578 if you
would like to purchase a rear facing camera for your DX4000.
Speed unit
You can set your DX4000 to display speed limits and your speed in either MPH or
KMH.
Soft push the settings 'cog' icon on the standby screen to enter the settings menu
followed by the 'Dash Cam' menu button and the 'Down' arrow button until you see
'Speed unit'. Tap the 'Speed unit' setting on the screen to switch between the two
options.
To save your settings, press the 'return arrow' followed by the 'X' to return to the
standby screen. If there is no activity for 60 seconds, your DX4000 will save your
setting and return to the standby screen automatically.

Status LED setting

The status LED indicates whether the unit is powered on or off and flashes when the
unit is recording. It can be switched on or off as necessary.
Soft push the settings 'cog' icon on the standby screen to enter the settings menu
followed by the 'Dash Cam' menu button and the 'Down' arrow button until you
see 'Status LED'. Tap the 'Status LED' setting to switch the status LED on or off as
required.
To save your settings, press the 'return arrow' followed by the 'X' to return to the
standby screen. If there is no activity for 60 seconds, your DX4000 will save your
setting and return to the standby screen automatically.
Set Time and Daylight saving mode
The date and time is automatically set by GPS so you do not need to set this
yourself but you can also adjust the time between GMT and Daylight saving as
necessary.
Soft push the settings 'cog' icon on the standby screen to enter the settings menu
followed by the 'Dash Cam' menu button and the 'Down' arrow button until you see
'Set Time' and 'Daylight Saving'. Tap the 'Daylight Saving' feature on the screen to
switch between GMT and Daylight Saving depending on the time of year.
To save your settings, press the 'return arrow' followed by the 'X' to return to the
standby screen. If there is no activity for 60 seconds, your DX4000 will save your
setting and return to the standby screen automatically.
11