Menu Setting; Network Settings - Prestigio MULTIBOARD LIGHT Quick Start Manual

User manual Prestigio Multiboard

Menu Setting

Select sidebar menu, press setting icon to enter signal source setting menu, then press the
menu icon on the bottom right corner of signal source setting page to enter menu page, it
can adjust the back light, auto-backlight, EDID version, HDR, HDMI output resolution setting
etc,. when move to menu setting suboption.

Network Settings

Select sidebar menu, press the setting icon and then enter systems setting page where it
can conduct wireless network, wired network, wireless hot spot setting.
• Wireless Network (optional)
1. Select sidebar menu > System Settings > Wireless Network.
2. Turn on WLAN switch.
3. Select the network to be connected from Network List, enter the connecting
password, and then success to connect the wireless network.
4. If there is no desired network in Network List, it can manually add a network.
• Wired Network
1. Connect one end of the network cable to the network port of this machine before
using wired network, and then connect the other end to a router.
2. Select sidebar menu > System Settings > Wired Network.
3. Turn on connecting switch.
4. Select "DHCP" in IP settings, and then the machine will automatically obtain an IP
address and connect to network.
5. Select "Static" in IP settings, manually input IP address, gateway, network prefix
length, DSN address, and then click "Finish" to connect to network.
EN - 15