Black & Decker POWER TO GO CPI100B Instruction Manual page 8

OPERATING INSTRUCTIONS
Charging the POWER TO GO ®
Attach the barrel tip of the AC Charging Adapter to the AC Charging Port of the
POWER TO GO ® and plug the standard two-prong plug into an appropriate,
functioning 120 volt AC outlet. The red Battery Status LED Indicator will flash,
indicating a proper connection has been made and the unit is charging. The green
Battery Status LED Indicators will gradually light as the charge level rises.The
POWER TO GO ® must be charged for approximately 17-20 hours prior to first use.
All Battery Status LED indicators will be lit solid (the red indicator will stop flashing)
when the unit is fully charged.
Operating the POWER TO GO ®
Once fully charged (see "Charging the POWER TO GO ® " in the previous section),
turn on the CPI100B by pressing the ON/OFF Pushbutton. Plug a USB and/or AC
powered device into the unit.
The standard two-prong 115 Volt AC and USB Outlets allow the user to operate multiple
devices simultaneously. Simply plug the equipment into the unit and operate normally.
Note: Ensure wattage of all equipment simultaneously plugged into the
CPI100B does not exceed 80 watts continuous.
120 Volt AC Outlet
1. Make sure the CPI100B is properly charged. Turn the unit to the ON position. Both
Status LED Indicators will be lit solid green, indicating proper operation of the unit.
2. Plug the (110/120 volt AC) appliance into the Inverter's two-prong AC outlet
and operate normally.
Note: The CPI100B will not operate appliances and equipment that generate
heat, such as hair dryers, electric blankets, microwave ovens and toasters.
USB Power Port
1. Make sure the CPI100B is properly charged. Turn the unit to the ON position.
Both Status LED Indicators will be lit solid green, indicating proper operation of the
unit.
2. Plug the USB-powered device into one of the inverter's USB Power Ports and operate
normally.
Note: The POWER TO GO's USB Power Ports do not support data communi-
cation. They only provides 5 volts/500mA DC power (each) to external USB-
powered devices.
Rated Versus Actual Current Draw of Equipment
Most electrical tools, appliances, electronic devices and audio/visual equipment
have labels that indicate the power consumption in amps or watts. Be sure that
the power consumption of the item to be operated is below 80 watts
7