Conference Calls - Jabra Engage 75 User Manual

7.3 Conference calls

Add headset(s) to a conference call
Up to three additional headsets can be
connected to one base for conferencing.
Primary
headset
Primary
headset
1. Undock the primary headset.
2. Dock an additional headset in the base.
3. Tap to add the headset as an additional
conference headset.
4. A voice prompt will play in the primary
headset. Press the Call button on the
primary headset to accept the additional
headset to the conference. The audio will
now be shared between headsets.
By default, the additional headset will be
muted.
Note: It is possible to use Jabra Engage 65 headsets for
conference calls.
Add headset(s) to a conference call
without docking
Up to three additional headsets can be
connected to one base, without the need to
dock the headsets.
1. Tap
Additional
menu, and navigate to Add headset.
headset
2. Tap
3. Tap
4. Power off the additional headset by holding
the Call button for 4 seconds.
5. Put the additional headset into pairing mode
by holding the Call button for 5 seconds until
the status LED on the headset flashes blue.
6. A voice prompt will play in the primary
headset. Press the Call button on the
primary headset to accept the additional
headset, to the conference. The audio will
now be shared between headsets.
By default, the additional headset will be
muted.
Note: It is possible to use Jabra Engage 65 headsets for
conference calls.
35
on the base to open the settings
to switch to Pair without docking.
to put the base into pairing mode.
36