Connect To A Computer - Jabra Engage 75 User Manual

5.4 Connect to a computer

1. Plug the supplied micro-USB cable into the
port marked on the base, and into an
available USB port on your computer.
2. Plug the base into a power supply using the
supplied power cable.
3. Select a language on the base, and do not
start the setup wizard. The base is already
configured for computers and does not
require the setup wizard.
4. Ensure the Jabra Engage 75 is set as the
default playback device and recording device
in your operating system's sound settings,
and/or your preferred softphone (e.g. Skype
for Business). It is recommended to
download and install Jabra Direct from
jabra.com/direct.
5.5 Connect headset to a computer
1. Plug the supplied micro-USB cable into an
available USB port on your computer.
2. Press and hold either the Volume up, or
Volume down, or Mute button on the
headset while plugging the other end of the
micro-USB cable into the headset. Once the
LED on the headset stops flashing green,
release the button.
3. The headset can now be selected as as audio
playback device on the computer.
21
1
2
22