How do i connect to a polycom ip 320, ip 321, ip 330, ip 331, ip 335, ip 430, ip 450, ip 550, ip 560, ip 650, ip 670 or vvx series desk phone so i have remote call control using my headset (3 pages)
Connect to power ENGLISH Plug the base into a power supply, and then follow the set up instructions on the screen. The set up instructions will help you connect to your computer, mobile device or desk phone. For desk phones, first connect all the cables (refer to the following pages).
Page 5
Desk phone cables Desk phone without headset port Connect the cables (as illustrated), and then start the Setup Wizard in the menu to complete desk phone setup.
Page 6
Desk phone with headset port Connect the cables (as illustrated), and then start the Setup Wizard in the menu to complete desk phone setup.
How to wear Neckband Headband The headset can be worn on the left or right ear.
Page 8
Answer/end Volume Volume down Mute NFC zone Answer End/reject call call Volume Volume down Busylights Press Menu Menu both left right volume buttons Accept Back Mute Menu Down = tap Up = hold...
Need help?
Do you have a question about the Engage 75 and is the answer not in the manual?
Questions and answers