Makita UM164D Instruction Manual page 7

end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for cutting lawn edges or sprouts.
Noise
The typical A-weighted
according to IEC60335:
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to IEC60335:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Hedge trimming operation with optional hedge
shear blades
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
and returned
noise level determined
) : 75.9 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
noise level determined
) : 73.7 dB (A)
pA
Vibration
to an
The vibration
determined according to EN60745:
ENE015-1
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
ENG900-1
value depending on the ways in which the tool is
used.
sum)
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG901-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Grass Shear
Model No./ Type: UM164D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60335, EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG905-1
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
7
total value (tri-axial
2
) : 2.5 m/s or less
h
2
30.9.2015
Yasushi Fukaya
Director
ENG900-1
vector sum)
ENG901-1
ENH003-15