Tesla VISION GM610BF User Manual page 6

ENG
INSTRUCTION OF BASE INSTALLATION
Installation steps of the base:
1. Remove the styrofoam on the back;
2. Align the hole of support with the VESA hole of the backcover, and lock with 4 M4x16 screws (4 in a bag);
3. Insert the base into the support;
4. Lock with 3 M4x16 screws (3 in a bag).
Note: Some of the contents in this manual may differ slightly from the final product, and the later shall be referred to.
Step 1
Step 3
Step 2
Step 4
6