General descripti n HHR5000 is a dual RFID reader. The HHR5000 is a m dular unit which c nsists f: Intr ducti n The HHR 5000 is an easy to operate Handheld 1. Handgrip with LiIon battery Reader for ISO 11784/11785 transponders. It is designed to be used under ‘real life’...
HHR5000L with LCD Disp ay Keyboard navigation Switches the unit On and if held for more than 3 seconds, off. It is also used to move back to main menu when reading tags. Select Escape, go to previous menu Previous Menu item/field The number 1 and special functions of space, (.), (\) Next Menu item/field Read Tags...
HHR5000 battery handgrip body • It is possible to charge up to two battry packs at • Status LED on the HHR5000 will flash up in green the same time color every 6 seconds and charging will begin • It will charge the battery handgrip in...
• To reduce risk of injury, charge only oryginal • To reduce risk of injury, charge only oryginal charging light will light up and charging will begin BioControl type rechargeable batteries. Other BioControl type rechargeable batteries. Other types of batteries may burst causing personal types of batteries may burst causing personal • Once fully charged, the green charging light will...
Establishing Connection USB connection Bluetooth connection • To connect HHR5000 and PC with USB interface, HHR5000 is equiped with a mobile phone simply connect HHR and PC with included USB application, which supports real time connection cable To connect the HHR5000 device with the mobile • A window will automatically open on your...
Demo Applicatio Main Menu HHR5000 Demo application has 4 menu entries. When the HHR5000 is launched, you will see the following screen. The status bar is at the top of the display. Time, battery status and current connections like Bluetooth are displayed.
Demo Application ISO Reader Menu Read ISO Is used for reading RFID tag after pressing the button. When the device reads a tag, it immediately displays it in a designated field above. Continuous This function turns on continuous reading of transponder, it displays each transponder number in the field and stores it with time stamp in memory.
Demo Applicatio NFC Reader Menu Read NFC Is used for reading NFC tag after pressing the button. When the device reads a tag, it immediately displays it in a designated field above. Co ti uous This function turns on continuous reading of NFC transponder, it displays each transponder number in the field and stores it with time stamp in the memory.
Demo Application Test Menu ISO Turns on or off continuous reading of RFID transponder NFC Turns on or off continuous reading of NFC transponder LCD Turns off LCD screen, to turn it on press any key on keyboard LEDS Turns LED on or off Buzzer Turns sound buzzer on or off Vibration...
Antenna voltage and tuning values are displayed Battery status Battery voltage and percentage are displayed Bluetooth MAC address and device name are displayed Firmware Current firmware version: HHR – main unit ISO – RFID reader NFC - reader Bootloader Enables updating HHR5000 firmware using your computer...
The following instructions will help rise, but at lower the temperatures battery life may you get the most out of your HHR5000 in real life be reduced. When working in extremely cold circumstances.
Specifica ion Suppor ed ag s andards FDX, HDX, B-transponders, NFC ISO11784/5, ISO14443A/B, S andards ISO15693, ISO18000-3 and Tag-it In erface USB, Bluetooth Ba ery 2x18650 LiIon batteries in series with protection circuitry Ba ery charger ou pu 8,2V/1,3A Ba ery life 5 years Power supply External wall plug-in 12VDC/3A...
Compliance with national regulations FCC Compliance statement This equipment was tested and found to comply This device complies with FCC RF radiation with the limits for a Class A digital device, pursuant exposure limits set forth for an uncontrolled to part 15 of the FCC Rules. These limits are environment.
Safety devices This system is designed to be safe to operate. The safety devices that are installed are there for personal safety and must not be modified, removed, or disconnected. Any modification to the equipment's original design may compromise the personal safety. Consequently, it may also void or limit the warranty.
Warranty Note! BioControl will not take any responsibility for damage resulting from faulty operation, or for improper or inadequate care and maintenance. Note! BioControl will not take any responsibility for any damage resulting from frost. The owner/user must take the necessary measurements to prevent...
Need help?
Do you have a question about the HHR5000 and is the answer not in the manual?
Questions and answers