Preparing Your Machine For First Use - DeLonghi La Specialista ARTE EC915X Instructions For Use Manual

2. PREPARING YOUR MACHINE FOR FIRST USE

1. Wash and dry all accesso-
ries (including water tank
(A7)) with warm water
and washing-up soap.
5. Place a container with a
minimum capacity of 3.38
fl oz /100 ml under the hot
water spout (A11).
9. Place a container under
the portafilter and steam
wand (A9) and press OK.
Repeat 2 times to rinse the
coffee circuit.
1
2. Insert the drip tray (A19)
complete with cup grille
(A16) and (A17).
5
6. Press OK (B6) to start
priming. Hot water will
be delivered from the
hot water spout.
9
10. Push the STEAM button (B9)
and let the steam flow out
for a few seconds. Then push
the button again to stop. For
optimal steam performance
we recommend you repeat
this action 3 or 4 times. This
is to purge the steam circuit
before frothing or steaming
your milk.
MAX
2
MAX
3. Remove the water tank
and fill with fresh clean
water, taking care not to
exceed the MAX level.
MAX
6
7. Insert coffee filter ((C3)
or (C4)) in the portafil-
ter (C1).
10
6
3
4. Plug in the machine
and make sure the main
switch (A1) on the side
of the machine is pressed
and in the I position.
7
8. Attach the portafilter to
the machine: Align the
portafilter handle with the
"INSERT" mark, then turn
the handle to the right
until it is aligned to the
"CLOSE" mark.
4
8